Stock Fence – HT8/80/15 – 100m
£208.99 inc. VAT
In StockQuantity | Price |
---|---|
2 - 5 | £202.72 |
5 - 10 | £196.45 |
10 - 20 | £190.18 |
20 - 100 | £183.91 |
Length | 100m (328ft) |
---|---|
Height | 80cm (2.6ft) |
Wire Diameter (Gauge) | 1.9mm (14g) – 2.5mm (top & base) |
Material | High tensile steel |
---|---|
Coating | Hot dip galvanised |
Wire Diameter (Gauge) | 1.9mm (14g) – 2.5mm (top & base) |
Line Wires | x8 |
Vertical Wire Spacing | 15cm (6 inch) |
Hole Shape | Rectangle |
Mesh Construction | Knotted |
Product Form | Roll |
Weight | 70kg |
Corrosion Resistance | Yes – British Standards |
---|---|
UV Resistance | Yes |
Can Withstand Salt Water | No |
Suited to Indoor | No |
Tensile Strength Range | 450-550 Nmm2 (vertical wires) / 600-700 Nmm2 (horizontal wires) |
Flexibility Grade | Easy to bend |
How to Cut | Wire cutters |
Wire Tolerances Standard | Yes – conforms to BS EN 10218-2:2012 |
---|---|
Hole Size (Aperture) Standard | Yes – conforms to BS EN 10218-2:2012 |
Accurate Zinc Coating | Yes – conforms to BS EN 10244-2:2009 |
Zinc Quality Standard | Yes – conforms to BS EN 1179:2003 |
Manufactured in | Europe |
Wire Diameters Standard | Yes – conforms to BS EN 10218-2:2012 |
Colour | Grey |
---|---|
Handle with Gloves | Recommended |
Ease of Fence Installation | Hard |
---|---|
Speed of Fence Installation | Slow |
Tools Required to Install | Hammer, hog ring plier (if using hog rings), pliers, spade, Spirit level, stretcher tool, tape measure |
Accessories Required | post strut, Posts, radisseur, stretcher bar, tension wire |
Experience Required | High |
People Required to Install | x2 |
Downloadable Instructions | Yes – download PDF |
Post Spacing | 3-5m |
Install with T Posts | Yes |
Install with Wood Posts | Yes |
Install with Metal Posts | No |
Install with Concrete Posts | No |
Attach to Wood | U staples |
Attach to Concrete | Eye bolts & tension wire |
Attach to Mesh | Cable ties |
Attach to Soil | Ground pegs |
Requires Tension Line | Yes – will sag over time |
How to Cut | Wire cutters |
Hinge Joint Coating | Yes – conforms to BS EN 10223-5:2012 |
---|
Specification
Installation
Related Categories