Metal Tree Guards
Hard-wearing, corrosion-resistant galvanised metal tree guards to protect your trees from dogs, deer, rabbits and other large animals.
UK manufactured to BS EN 10244-2:2009 & BS EN 10218-2:2012 standards
Customer Images
Multi Purchase Discounts
Discounts are calculated by the website when you add multiples of this product to the cart.
Quantity | Price |
10 – 30 | 3% |
30 – 60 | 6% |
60 – 100 | 9% |
100 – 1000 | 12% |
Installation Instructions
To Do | Explanation |
Step 1 – Site Preparation
|
Ensure that the location is free from Measure the diameter of the tree |
Step 2 – Stake Installation
|
Position a wooden stake inside the Utilize a hammer to firmly drive the stakes into the ground, ensuring the stability of the tree guard. It’s recommended that approximately one-third of the stake be buried underground. For most young feathered trees, one or two stakes are typically adequate. However, taller, larger, or more vulnerable trees may require additional support, such as double |
Step 3 – Position the Tree Guard
|
Unroll and lay out the pre-formed Carefully lift and position the tree Adjust the placement of the tree |
Step 4 – Attach Tree Guard to the
|
After positioning all the stakes, use If wire stakes are used, employ cable ties or a piece of wire to attach the tree guard. |
Step 5 – Attach Mesh Ends
|
The mesh ends can be connected |
Step 6 – Trim Excess Wire
|
Employ wire cutters to trim any |
Step 7 – Inspect and Maintain
|
After installing the tree guard, Adjust the guard’s positioning or Periodically inspect the tree guard to verify it remains secure and Monitor the tree’s growth to ensure |